APlusLift HW-10KOH 10000LB 2-Post Heavy Duty Over Head Car Lift Auto Truck Hoist

SKU: hippol_7P71WZ
In Stock
$500.00
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare

APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. It is upgraded with thicker steel for stronger support (Column Steel upgraded to 13/64″ from 11/64″; Carriage and Arm Steel upgraded to 15/64″ from 3/16″; Carriage yoke upgraded to 9/16″ from 15/64″)

Description

New Installation Manual! 24 Months Parts Warranty!

  • Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!
  • CE Certified Lift Structure and Hydraulic System
  • 6’9″ Lift Height Maximum with Truck Adapters
  • Durable Powder Coated Finish on Steel
  • All Robot Welded Structure
  • Double Seal Rings Protecting PU Material
  • Carriage Material Q355, Stronger Than Normal Q235 Steel

Sorry we do not provide liftgate service, as car lift package is too long to use liftgate.

 

Each shipment has a tracking number. Please note that delivery time is estimated but not guaranteed.

 

Full Details of the Product Can Be Found on Manufacturer’s Website.

APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. It is upgraded with thicker steel for stronger support (Column Steel upgraded to 13/64″ from 11/64″; Carriage and Arm Steel upgraded to 15/64″ from 3/16″; Carriage yoke upgraded to 9/16″ from 15/64″)

We confidently offer a 2 years warranty for all the lift parts. This lift, especially the cylinder sealing parts, will last for a long time. We have all replacement and optional parts available. And we welcome suggestions to improve our products and service!

All warranty and repair parts are available.

 

Specification and Features

  • Heavy Duty Design:
    • Column Steel Thickness: 13/64″
    • Carriage Steel Thickness: 15/64″
    • Arm Steel Thickness: 15/64″
    • Carriage Yoke Thickness: 5/16″
    • Base Plate Steel Thickness: 5/8″
  • Driving Mode: Dual hydraulic cylinders, chain drive
  • Lifting Capacity: 10,000 LB
  • Combo (Symmetrical and Asymmetrical) Arm Assembly:
    • Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
    • Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″
    • Screw-in pads 4 pieces included
    • Truck adapters 4 pieces included
  • Safety Mechanism:
    • Double point safety lock release
    • Automatic arm lock restraints
    • Relief valve built in power pump to prevent overloading
    • Door guards protection rubber
    • Up-limit switch to protect cylinders working stroke used in safe length scope
    • Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
    • Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
  • Control System:
    • Lifting operation by pressing “UP” button on motor
    • Manual lowering operation by pressing lever
    • Relief valve built in power pump to prevent overloading
    • Overall Height: 143 3/16″
    • Overall Width: 134 5/16″
    • Minimum Height of Arm Top: 4″
    • Maximum Lift height with Truck Adapters: 81″
    • Maximum Lift height without Truck Adapters: 75″
    • Carriage to Carriage Width (Drive through clearance): 100″
    • Column to Column Width: 109″
    • Column Cross Section: 11″L x 7″W
    • Time to full rise: 50 sec
    • Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
    • Hydraulic Oil (not included): 3-5 gallons AW32/AW46
  • Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)
  • Anchor bolts/mounting hardware included
  • Tool trays and toe guards included
  • Shipping Weight: 1,450 LB
  • Shipping package size: 113″L x 22″W x 40″H
  • Installation Manual

Additional information

GTIN

2000000465258

Reviews

There are no reviews yet.

Be the first to review “APlusLift HW-10KOH 10000LB 2-Post Heavy Duty Over Head Car Lift Auto Truck Hoist”

Your email address will not be published. Required fields are marked *

APlusLift HW-10KOH 10000LB 2-Post Heavy Duty Over Head Car Lift Auto Truck Hoist $500.00
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare