CONTAINER LIFTING JACKS (10T REMOVABLE WITH ELECTRIC MOTOR 230V)

SKU: hippol_CGXOH1
In Stock
$450.00
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare

Description

Quick Overview:

  • For lifting, levelling and depositing of ISO containers
  • Lowering of containers from a truck up to 1.600 mm height
  • Suitable for variable container height
  • Simple to install
  • No component heavier than 25 kg
  • Rack can be attached at correct height for direct unloading

 

Container Lifting Jacks are suitable for lifting containers on and off trucks without the need of a crane on site. Perfect for confined spaces or where cranes are unable to access. Our lifting stems are modular in design so that low-cost solutions are available for your specific requirements. A lifting system consists of four lifting supports. For lowering a container from a truck, the jacks are mounted and locked into the ISO-corners. Then the jacks are lowered to the ground and the container is lifted so that the truck can drive out. After that, the container can be lowered either to its working position or to the ground. Depending on the application of the lifting support, the following technical parameters can be achieved:

Features:
  • Raise and lower Container weights of 4 t to 15 t
  • Lifting heights from 500 mm to 1,750 mm (Optional maximum: 2,000 mm)
  • Attachment to ISO corners
  • Position Control – Innovative inclinometer-based position control is a special characteristic of our lifting systems.
  • Lifting and lowering action parallel to the ground during loading operations in uneven terrain (patented)
  • Automatic initial inclination detection
  • Inclination offset to zero degrees
  • Control precision: +/- 0.1 degrees
  • Safety shutdown when inclination exceeds 3.5 degrees (or 6 degrees, as required)
  • Individual support control unit available as optional attachment
  • Non-standard lifting heights
  • Modified basic carrying capacity
  • Specially adapted mounting and interlocking systems
  • Special base plates
  • Holding fixtures for easy lifting support transportation
  • Tailor-made solutions with regard to functionality and intended uses
  • Advice and assistance to customers implementing specific projects
  • Special colours and paint coats
  • Expertise and expedient performance when it comes to tests, trials and provision of samples
  • Special manual winch to assemble heavy item

 

 

Specs:
Model SKU Type Dynamic Load System / Jack (kN) Static Load System / Jack (kN) Overall Height (mm) Lift (mm) Load Inclination (˚) Ground Slope (˚) Aditional Load – Wind Load (km/h) Operating Temperature (˚C) Weight Per Set (kg) Crank Force / Paired Jack At Max Lift Capacity (N) Lift / Crank Turn (mm) Leveling Tolerance (˚) Motor Connection (option) Motor Rating (option) Consumption Lifting Speed (mm/min) Operation Mode Number Of Motors Electric Drive With Automatic Leveling (option) (connection) Motor Rating Consumption Lifting Speed Operation Mode
10T Removable Version 1889.10 Basic Version 231082 6120 100/50 kN 100/50 kN 3100mm 1750mm 64 km/h -33˚C Up to 50˚C 360kg 150 N 2.8mm 0.3˚ 400v AC/24 V DC 2 x 750 W- 2 x 700W 5A – 75A 300mm/min S2-10 min N/A N/A N/A N/A N/A N/A
10T Swing To Version 1889.10 207009 1352 100/50 kN 100/50 kN 2400mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 390kg 150 N 2.8mm 0.1˚ 400v AC/24 V DC N/A N/A N/A N/A 2 400V AC/ 230V AC/ 24V DC N/A N/A N/A N/A
10T Removable 1889.10 209819 1747 100/50 kN 100/50 kN 2330mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 355 kg 150 N 2.8mm 0.1˚ 400V AC / 230V AC / 24V DC 2x750W 2x750W 2x700W 8A-12A-80A 300mm/min S2-10min N/A 400V AC/ 230V AC/ 24V DC 4x500W 4x500W 4x350W 12 A – 12 A – 80A 280mm/min S2-15 min
5 T Removable Version 1889.5 205079 1749 50/25 kN 50/25 kN 2330mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 260 kg 150 N 5.8mm 0.1˚ 400V AC / 230V AC / 24V DC 2x750W 2x750W 2x700W 5A-10A-75A 580mm/min S2-10min N/A 400V AC / 24V DC 2x750W 2x700W 12 A – 12 A – 75A 500mm/min S2-15 min
5T Swing To Version 1889.5 209816 1749 50/25 kN 50/25 kN 2400mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 350kg 150 N 5.8mm 0.1˚ 400V AC / 230V AC / 24V DC 2x750W 2x750W 2x700W 5A-10A-75A 580mm/min S2-10 min N/A 400V AC / 230V AC / 24V DC 4x500W 4x500W 4x350W 12A-12A-75A 500mm/min S2-15 min
5 T Removable With Optional Motor Driven 1889.5 209830 1749 100/50 kN 100/50 kN 3100mm 1750mm 64 km/h -33˚C Up to 50˚C 360kg 150 N 2.8mm 0.3˚ 400V AC/ 24V DC 2x750W 2x700W 5A-75A 300m/min S2-10 min N/A N/A N/A N/A N/A N/A
20T Removable 1889.20 209821 1745 200/100 kN 200/100 kN 2330mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 570kg 190 N 1.6mm 0.1˚ 400V AC/ 230V AC/ 24V DC 2x750W 2x750W 2x700W 8A-12A-80A 160m/min S2-20 min N/A 400V AC / 230V AC / 24V DC 4x500V 4x500V 4x350V 12A- 12A-80A 160m/min S2-30 min
20T Swing To Version 1889.20 209882 1362 200/100 kN 200/100 kN 2400mm 1750mm 10˚ 64 km/h -33˚C Up to 50˚C 650kg 190 N 1.6mm 0.1˚ 400V AC/ 230V AC / 24V DC 2x750W 2x750W 2x700W 8A-12A-80A 160m/min S2-20 min N/A 400V AC / 230V AC / 24V DC 4x500V 4x500V 4x350V 12A-12A-80A 160m/min S2-30
10T Removable 1689.10 232183 1689.10 100 kN 50 kn 3095mm 1560mm 40 km/h -33˚C Up to 50˚C 545kg 180 N 4mm 0.1˚ N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
3T Removable 1483.3 209407 1483.3 30/15 kN 30/15 kN 2075mm 1600mm 64 km/h -33˚C Up to 50˚C 320kg 90 N 5.8mm 0.5˚ N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Additional information

GTIN

2000000466255

Reviews

There are no reviews yet.

Be the first to review “CONTAINER LIFTING JACKS (10T REMOVABLE WITH ELECTRIC MOTOR 230V)”

Your email address will not be published. Required fields are marked *

CONTAINER LIFTING JACKS (10T REMOVABLE WITH ELECTRIC MOTOR 230V) $450.00
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare